Click Buttons above to see other pages!!
Widening and Narrowing
All modified wheels will run true when done and will balance out. Wheels with severe runout or damage may be rejected.
Please double check your measurments, we give you what you ask for!
All wheels sent in for modifications MUST have in the box accompanying them the Weldcraftwheels.com modification form filled out and signed. Please download and fill out and then include in box with wheels. If you are drop shipping fraom another source... Please fax this form to your supplier to be included with your wheels. We cannot modify wheels without this form completed and signed.
Widening and Narrowing:
Weldcraft Wheels is your source for expert repairs and fabrication on your custom or factory wheels. We specialize in wheel modification(aluminum or steel). We widen wheels and narrow wheels. We also move your centers when possible. When widening we use a band of material of the width requested. So no second donor wheel is required. On aluminum wheels we V-groove and hand tig each seam for maximum penetration. We can help you achieve that custom look or get the most from your power level by allowing you to run larger tires for better traction and drag strip or road course performance. Perhaps you would like to maintain a "sleeper" look on your muscle car by running stock appearing wheels but want the benefit of a wider tire? We can alter your stock style wheels to allow much wider rubber without sacrificing the stock appearance of your factory wheels. Running wider tires on too narrow of a rim results in lost contact patch and improper wear. Our widening process will eliminate this concern completely.
Widening
Most wheels are widened to the inside of the vehicle. This will increase your backspace by the same amount, so be sure about your clearance.
We use your wheels so no donor wheel is needed. We add in increments of 1/2 inch.
Narrowing
Sometimes smaller is better....front runners.
We can narrow steel or aluminum as much as they physically allow. The size of the barrel and the amount of taper will limit this. You can email a picture of your wheel (minus the tire) so we can determine how much can be removed.
Please include wheels in the subject line.
Weldcraft wheels accepts:
 |
 |
 |