May 28th, 2008

Hi James,

I know you asked for pictures of the wheels on the car and I will be sending those when Project Imperial is complete. However, I got the tires mouted this afternoon and the tire/wheel combination looks so absolutely awesome, I wanted you to see what your handywork looks like with Hoosier 33x21.5x15 Pro Street Radials right away. The Hoosiers have a 17.25" tread width which exactly matches the width of the wheels. How about that! The tire/wheel combination looks even better than I expected.

The guys at Custom Truck Shop could not believe the wheels and were all questions. They were super, ultra careful mouting the tires from the back side and didn't even smudge the wheels.

This turned out to be a much more complex, lengthy and expensive project than I initially anticipated but then nothing worth while is ever easy, is it?

The Imperial is going back into the chassis shop next month and I hope to finish up on the details and get it back on the road in August, in time for several big Mopar shows this fall/winter. The Imperial will undoubtedly be generating even more questions, especially about the rear wheels and I'll be sure to mention Weldcraft wheels to anybody who asks.

I want to thank you again for all the expert work...the end result was well worth the wait

Ted Wozniak Click here to see his pics

March 8th, 2008

I am Laurence Garza you just did two 03 Lightning wheels two inch wider! The wheels look great! Thanks for the great work they Balance great also which the guy of dicount tire couldn't believe how good they did! Thank you again!

Laurence Garza Click here to see pics of his SVT

March 4th, 2008

James I saw the wheels for the first time today. What an awesome job.

Thank you

The car is getting wet sanded and detailed tomorrow I'll Send more pics if you want.

Thanks again James awesome work. After the car show I'll try to see if the fronts will widen nicely too.

Jason Polzer

February 25th, 2008

James,

I can't thank you enough for the job you did on my ranger wheels. They gave me the look that I wanted to keep the truck looking stock (except from behind). I got it to the track last fall and it ran a 11.86@115mph with a 347, no nitrous, turbo, or blower. It surprised a ton of people. They didn't expect much because of how stock it looks. Anyway, thanks again!

Brian Volk......Click here to see pics of my truck.

February 25th, 2008

James,

I used WD-40 to remove the duct tape residue from the wheels as you instructed and as you said it worked very well, Thanks you again. I have included some pictures of my car with the wheels on the car. Thanks you again.

Tim

February 25th, 2008

James,

Very happy to tell you that the wheel widening was a success. The wheels balanced out better than stock and I get no road noise. Thank you for your excellent service and quality of your work. Thanks to you I was able to retain my "sleeper" look and achieve the traction I so desperately needed. My boosted G35 is putting down over 450 whp and the wheels are taking the abuse. Attached are a few pics of the installation.

Thanks again

Michael Medina......Click here to see pics of my car.

February 6th, 2008

Hi James,

My name is Matt Fikac and I recently had you widen and narrow a set of wheels for my Dodge Ram truck. I cannot tell you how happy I am with how these wheels turned out. The welds look amazing and the new stance really makes it look mean. I will let everyone on the dodge truck forums know about you and your quality of work. Thanks again!!

Matt Fikac

January 2nd, 2008

Hello James,

The wheels arrived safe and sound and when I had the tires mounted, there was less runout than a factory original wheel that had a flat that needed repairing. Thanks for including the lugnuts and I will certainly recommend Weldcraft Wheels to anybody needing wheel work. Thanks again. Click here to see a picture of Marks car.

Mark Selby

January 2nd, 2008

Hello, I recieved my widened steel wheel today and I want to thank you. You did a great job, and it is 100% dead on with what I wanted...to match the specifications of my 3 other wheels. Thanks again and I'll be sure to pass the name along on the forums!!

Griffin Prentice

October 5th, 2007

James, finally getting to a point where I can send you pictures of the vintage centerlock wheels you guys widened to 14" for us. They look great on the rear! Will eventually anodize Satin Black. Thanks!!!

Justin Broughton

September 6th, 2007

Hi James,

I appreciate the professional workmanship that you put into my wheels! Thank you very much, definitely will recommend your services to others!

Michael Negre

September 5th, 2007

Hi James,

I am sending you some pictures of the car your wheels are on thx again for the AWESOME workmanship. THx Again Darcy Sheppard and his 1993 SVT Cobra

September 5th, 2007

Dear James,

Thanks for the good job. The wheels look nice and I can finally run some real Fattys in the back. No problems at all holding 410rwhp on my daily driver. The car handles better it needed this all along.

James Moretich

September 5th, 2007

Hey James,

Im sending a few pics of my wheels on the car at the 2007 spring Bugout in Manassas where I won 3rd place in the stock class. The wheels had a lot of influence on the 3rd place victory of me. I will be attending another car show in Ocean City Maryland known as H20. An all VW and Audi show. Thanks Guys.

Terry Beverley

May 30th, 2007

Hi James, Just wanted to say thanks for the awesome job you did on my rims! (16x9.5 IROC rims) The workmanship was top notch. I have referred several people to you asking who did my rims. And will continue to do so. They balanced great and are smoother than ever.

Thanks again for you excellent service!

Michael Hall

May 17th, 2007

Dear James,

The wheels look great!!!! Very happy with how they came out. The workmanship and attention to detail was fantastic. We are doing suspension mock-up right now and I will send you some pix soon.

Thanks!

Justin

May 16th, 2007

Dear James,

You and your shop are absolutely Awesome. I just got my wheels back today and had them wrapped in new rubber and put on my car. They spun them at the shop and were very impressed with how true they were. I can't thank you enough for the awesome job you guys did, and how great they look on the car. Anyone that isn't sure about whether to do this, DO IT!!! Once again, Thank you so much, it was exactly what I wanted, and better than expected.

Thanks so much,

Nick Jacob

Weldcraft wheels accepts: